amilo-forum.de

Inoffizielles Forum rund um die Notebooks der Amilo- und Lifebook-Serien von Fujitsu

AMILO M3438G / NVIDIA 8600M GS, FAN DON'T START

Darstellungsfehler, kein Bild auf dem Monitor, TV-Out,...

AMILO M3438G / NVIDIA 8600M GS, FAN DON'T START

Beitragvon luk3luk3 » 17.01.2009 12:41

Hi,

i have buyed few days ago on ebay an nvidia 8600m gs (acer bios) graphic card for replace my 6800go(artifact problem).
When i power on the laptop the fan is always off...instead if i plug my old 6800go the fan power on.
Any idea or suggestions to solve the problem?
I want to know if the problem is the graphic card that not works or if the graphic card is not compatibile with amilo.

I made the heatsink mod.
I try to install NHC (notebook hardware control) and via custom ACPI the fan is started.
But the fan start only in windows.......

Thx a lot

Luca
luk3luk3
 
Beiträge: 2
Registriert: 07.04.2008 17:04

Re: AMILO M3438G / NVIDIA 8600M GS, FAN DON'T START

Beitragvon sirix » 17.01.2009 14:31

you should try a hardware reset, i had the same problem with a different notebook. Finally reflashing bios fixed my problem.

you may also make sure that there is not space between your graphic card and the headpipe, if there is space use copper plates.

good luck
sirix
 
Beiträge: 23
Registriert: 16.11.2007 21:15

Re: AMILO M3438G / NVIDIA 8600M GS, FAN DON'T START

Beitragvon luk3luk3 » 17.01.2009 16:43

[quote="sirix"]you should try a hardware reset, i had the same problem with a different notebook. Finally reflashing bios fixed my problem.

you may also make sure that there is not space between your graphic card and the headpipe, if there is space use copper plates.

good luck[/quote]

what is hardware reset? reflashing motherboard bios or video bios?

thx
luk3luk3
 
Beiträge: 2
Registriert: 07.04.2008 17:04

Re: AMILO M3438G / NVIDIA 8600M GS, FAN DON'T START

Beitragvon sirix » 18.01.2009 12:09

what is hardware reset? reflashing motherboard bios or video bios?

thx


i don't know how to reset bios at M3438G Amilo series, normaly you unplug your notebook, remove the batterie (don't know the right word in english), then you have to press the power button for 30 secs.

for the bios you may take a look a fujitsu siemens support page for an update, doesn't when there is no newer version, try to reflash it, but take care, without a working fan notebook may shut down when it becomes to hot, this would brick your bios.
sirix
 
Beiträge: 23
Registriert: 16.11.2007 21:15


Zurück zu Grafik, Display