bin ich derzeit der einzige hier mit einem Amilo 1439g? Bevor ich zu den Dingen komme, berichte ich erst einmal von den Problemen, die schon gelöst sind:
- Echtes Kopfzerbrechen bereitete mir der Debian-Standard-Kernel, welcher sata_via und sd_mod nur als Modul enthielt und mir zunächst jeden Zugang zu meinem alten System verwehrte, welches ich mittels Knoppix von meinem alten Rechner auf das neue System kopiert hatte.
Abhilfe schaffte ein Booten über Knoppix und ein neues Kompillieren des Kernels mit den betreffen Modulen statischeingebunden. (Für reiserfs gilt das selbe, solltet Ihr das verwenden.)
Eine sehr gute Anleitung zum Erstellen des Kernels findet Ihr hier: http://newbiedoc.sourceforge.net/system/kernel-pkg.html
Hier nur soviel: Wenn Ihr make menuconfig nutzt sind folgende Module statisch einzubinden:- Device-Drivers/SCSI device support/SCSI Disk support (sd_mod)
- Device-Drivers/SCSI device support/SCSI low-level drivers/VIA SATA support (sata_via)
- Evtl. mit dem gewünschten Filesystem genauso verfahren
Das Wichtigste ist: Nach dem Erstellen des Kernels müßt Ihr das Image mit der --root Option installieren und damit auf das das spätere ROOT-Verzeichnis Eures DEBIAN-Systems verweisen:
z.B. dpkg -i MeineEigenerKernel.deb --root=/mnt/sda2
Danach noch z.B. /mnt/sda2/boot/grub/menu.lst anpassen und für den Fall, daß noch der Winbootblock installiert ist grub-install ausführen aber auch hier das --root-directory= beachten.
Wenn das System einmal gebootet hat, dann könnt Ihr auch wieder den Standard-Debian-Kernel istallieren, allerdings sollte vorher folgendes in /etc/mkinitrd/modules hinzugefügt werden:
sd_mod
sata_via
reiserfs
nvidiafb
vesafb - X11
xorg.conf sagt mehr als 1000 Worte (nach dpkg-reconfigure xserver-xorg):- Code: Alles auswählen
Section "Files"
#
FontPath "unix/:7110" # local font server xfs-ttf
FontPath "unix/:7100" # local font server xfs
#
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "false"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV43 [GeForce Go 6600]"
Driver "nv"
BusID "PCI:3:0:0"
EndSection
Section "Monitor"
Identifier "Standardbildschirm"
Option "DPMS"
# HorizSync 30-65
# VertRefresh 50-75
# HorizSync 30-82
# VertRefresh 58-75
# HorizSync 30-82
# VertRefresh 50-75
HorizSync 30-83
VertRefresh 55-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV43 [GeForce Go 6600]"
Monitor "Standardbildschirm"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Entscheidend ist :
HorizSync 30-83
VertRefresh 55-75
Die Werte habe ich aber etwas willkürlich aus den SUSE-Monitor-Referenzen und den Vorschlägen des dpkg-reconfigure xserver-xorg zusammengesetzt.
Folgende Probleme habe ich noch nicht gelöst, wäre aber richtig froh, wenn jemand schon seine Erfahrungen dazu mitteilen kann:
- 1280x800 auf Console. Habe folgende Boot-Optionen erfolglos probiert:
vga=864 bzw. vga=0x360
video=nvidiafb
video=vesafb
etc. - Sound funktioniert nicht, habe aber folgende Module geladen:
lsmod- Code: Alles auswählen
...
snd_hda_intel 16096 1
snd_hda_codec 59456 1 snd_hda_intel
snd_pcm_oss 54848 0
snd_mixer_oss 19968 1 snd_pcm_oss
snd_pcm 93416 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 24644 1 snd_pcm
snd 56260 8 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9696 1 snd
snd_page_alloc 9860 2 snd_hda_intel,snd_pcm
...
bzw. /etc/modprobe.d/sound- Code: Alles auswählen
alias snd-card-0 snd-hda-intel
options snd-hda-intel index=0
Außerdem habe ich folgende Optionen für snd-hda-intel ausprobiert (Siehe: /usr/src/linux/Documentation/sound/alsa/ALSA-Configuration.txt):
model=z71i
model=full_dig
Funktioniert aber nicht. Bei wem geht es? - ipw2200 habe ich auch noch nicht zum laufen gebracht, aber ich habe es auch noch nicht versucht.
- moden habe ich auch noch nicht unter Linux getestet