Hallo,
irgendwie verlassen mich meine Englischkenntnisse gerade total.
Habe mal bei Fujitsu Siemens nach Treibern geguckt und bis auf das BIOS auch schon alle installiert.
Bin nun am Überlegen, ob ich das neue BIOS auch gleich draufpacken soll.
Die Beschreibung ist natürlich in englisch und da verstehe ich gerade nicht wirklich, was die schreiben.
Also wie man ein BIOS Update macht, weiß ich, hatte schon etliche BIOSe updatet, dass ist ja keine große Kunst aber was das neue BIOS bringt weiß ich nicht. Kopiere den Text einfach mal mit hier rein und vielleicht kann es ja jemand übersetzen, bzw, sagen, ob es laut Beschreibung Sinn macht das BIOS zu Updaten.
current BIOS R01-A1G:
Solved problems:
- none
Known errors, problems and restrictions:
- The MS event viewer sporadically reports an �ACPIEC� error at system error records.
This only occurs if the system is under heavy load (e.g. stresstest).
But it does not influence the system"s reliablility or performance.
- After finishing BIOS flash in DOS mode the system is automatically rebooting.
But before entering the BIOS� POST screen it will automatically shut down.
This only occurs with the first reboot after BIOS has been updated in DOS
environment.
- If a supervisor password is set and the BIOS setup is left by choosing the
option "Exit Discard Changes" the password will still persist.
Additional information:
- Support for WinXP-64bit OS to switch between external display devices (TFT, CRT & TV).
- Support new AMD E stepping processors:
Mobile Athlon 64 4000+ (62W), Turion ML42 (35W), Turion MT40 (25W)
Update the CPU code for AMD E6 stepping Sempron processors.
- The DOS BIOS flash procedure contains an AC adapter interrogation;
that means that the flash procedure will only start if an AC- adapter is
connected. If no AC- adapter is connected a message will hint to plug an
AC adapter to the system.
- The BIOS can also be flashed by �WinFlash_R01-A1G.exe� under WinXP environment.
The system will automatically reboot after finishing the Windows based BIOS flash.
predecessor BIOS R01-A1E:
Solved problems:
- none
Known errors, problems and restrictions:
- After finishing BIOS flash in DOS mode the system is automatically rebooting.
But before entering the BIOS� POST screen it will automatically shut down.
This only occurs with the first reboot after BIOS has been updated in DOS
environment.
- If a supervisor password is set and the BIOS setup is left by choosing the
option "Exit Discard Changes" the password will still persist.
Additional information:
- Support for Mobile AMD Sempron E6 stepping processors has been added.
- The DOS BIOS flash procedure contains an AC adapter interrogation;
that means that the flash procedure will only start if an AC- adapter is
connected. If no AC- adapter is connected a message will hint to plug an
AC adapter to the system.
- The BIOS can also be flashed by �WinFlash_R01-A1E.exe� under WinXP environment.
The system will automatically reboot after finishing the Windows based BIOS flash.
Es grüßt herzlich Sylvia