amilo-forum.de

Inoffizielles Forum rund um die Notebooks der Amilo- und Lifebook-Serien von Fujitsu

BIOS Update

Alle Probleme mit Mainboard, BIOS, BIOS-Updates, Akku, Netzteil

BIOS Update

Beitragvon Sylvia » 17.02.2006 23:00

Hallo,

irgendwie verlassen mich meine Englischkenntnisse gerade total.
Habe mal bei Fujitsu Siemens nach Treibern geguckt und bis auf das BIOS auch schon alle installiert.
Bin nun am Überlegen, ob ich das neue BIOS auch gleich draufpacken soll.
Die Beschreibung ist natürlich in englisch und da verstehe ich gerade nicht wirklich, was die schreiben.
Also wie man ein BIOS Update macht, weiß ich, hatte schon etliche BIOSe updatet, dass ist ja keine große Kunst aber was das neue BIOS bringt weiß ich nicht. Kopiere den Text einfach mal mit hier rein und vielleicht kann es ja jemand übersetzen, bzw, sagen, ob es laut Beschreibung Sinn macht das BIOS zu Updaten.

current BIOS R01-A1G:
Solved problems:
- none
Known errors, problems and restrictions:
- The MS event viewer sporadically reports an �ACPIEC� error at system error records.
This only occurs if the system is under heavy load (e.g. stresstest).
But it does not influence the system"s reliablility or performance.
- After finishing BIOS flash in DOS mode the system is automatically rebooting.
But before entering the BIOS� POST screen it will automatically shut down.
This only occurs with the first reboot after BIOS has been updated in DOS
environment.
- If a supervisor password is set and the BIOS setup is left by choosing the
option "Exit Discard Changes" the password will still persist.
Additional information:
- Support for WinXP-64bit OS to switch between external display devices (TFT, CRT & TV).
- Support new AMD E stepping processors:
Mobile Athlon 64 4000+ (62W), Turion ML42 (35W), Turion MT40 (25W)
Update the CPU code for AMD E6 stepping Sempron processors.
- The DOS BIOS flash procedure contains an AC adapter interrogation;
that means that the flash procedure will only start if an AC- adapter is
connected. If no AC- adapter is connected a message will hint to plug an
AC adapter to the system.
- The BIOS can also be flashed by �WinFlash_R01-A1G.exe� under WinXP environment.
The system will automatically reboot after finishing the Windows based BIOS flash.
predecessor BIOS R01-A1E:
Solved problems:
- none
Known errors, problems and restrictions:
- After finishing BIOS flash in DOS mode the system is automatically rebooting.
But before entering the BIOS� POST screen it will automatically shut down.
This only occurs with the first reboot after BIOS has been updated in DOS
environment.
- If a supervisor password is set and the BIOS setup is left by choosing the
option "Exit Discard Changes" the password will still persist.
Additional information:
- Support for Mobile AMD Sempron E6 stepping processors has been added.
- The DOS BIOS flash procedure contains an AC adapter interrogation;
that means that the flash procedure will only start if an AC- adapter is
connected. If no AC- adapter is connected a message will hint to plug an
AC adapter to the system.
- The BIOS can also be flashed by �WinFlash_R01-A1E.exe� under WinXP environment.
The system will automatically reboot after finishing the Windows based BIOS flash.

Es grüßt herzlich Sylvia
Benutzeravatar
Sylvia
 
Beiträge: 429
Registriert: 08.02.2006 21:15
Notebook:
  • Amilo A1650G

Beitragvon Borkar » 17.02.2006 23:25

Solved problems:
- none


Ich glaube du musst das neue BIOS nicht installieren.

Support for WinXP-64bit OS to switch between external display devices (TFT, CRT & TV).
- Support new AMD E stepping processors:
Mobile Athlon 64 4000+ (62W), Turion ML42 (35W), Turion MT40 (25W)
Update the CPU code for AMD E6 stepping Sempron processors.

Sagt bloß, dass du nun den externen Videoausgang unter WinXP64bit benutzen kannst, und dass o.g. Prozessoren nun unterstützt werden.


Gruß
Borkar
Bild ..... Kaum macht man's richtig, geht's!
Benutzeravatar
Borkar
Moderator
 
Beiträge: 3744
Registriert: 30.06.2005 13:53
Wohnort: Bayern, Germany
Notebook:
  • M3438G

Beitragvon Sylvia » 17.02.2006 23:34

Hallo,

ich benutze eben das gewöhnliche Windows XP Prof., also nicht das 64 Bit System. Kann natürlich sein, dass es nach einem BIOS Update geht aber irgendwie kommt es mir auch komisch vor. Zumal ich denke mal, die Hardware wird ja nicht auf 64 Bit ausgelegt sein, da ist es doch irgendwie unlogisch, dass das BIOS es aber unterstützen soll.

Es grüßt herzlich Sylvia
Benutzeravatar
Sylvia
 
Beiträge: 429
Registriert: 08.02.2006 21:15
Notebook:
  • Amilo A1650G

Beitragvon Borkar » 18.02.2006 00:06

Welches Notebook hast du denn?

Gruß
Borkar
Bild ..... Kaum macht man's richtig, geht's!
Benutzeravatar
Borkar
Moderator
 
Beiträge: 3744
Registriert: 30.06.2005 13:53
Wohnort: Bayern, Germany
Notebook:
  • M3438G

Beitragvon Sylvia » 18.02.2006 00:11

Hallo,

ich habe das Amilo A1650 G.
Hat 80 GB Festplatte, AMD Sempron 2000 MHz, ATI Grafik mit 128 MB und 512 MB RAM.
Habe mir das Notebook Anfang Januar gekauft und bin vollkommen zufrieden mit dem.

Es grüßt herzlich Sylvia
Benutzeravatar
Sylvia
 
Beiträge: 429
Registriert: 08.02.2006 21:15
Notebook:
  • Amilo A1650G

Beitragvon Borkar » 18.02.2006 00:22

nun ja, da auf der FSC Downloadpage auch der PowerNow Treiber für den [AMD Athlon 64 Mobile 62W] herunterzuladen ist, macht das BIOS Update dahingehend schon Sinn. Du brauchst das nicht.

Gruß
Borkar
Bild ..... Kaum macht man's richtig, geht's!
Benutzeravatar
Borkar
Moderator
 
Beiträge: 3744
Registriert: 30.06.2005 13:53
Wohnort: Bayern, Germany
Notebook:
  • M3438G

Beitragvon Sylvia » 18.02.2006 00:32

Hallo,

denke mal, da ich ja keinen 64 Bit Prozzi in meinem Notebook habe, dass ich es einfach so lasse wie es ist und nicht das Risiko eingehe, was ja jedes BIOS Update mit sich bringt.

Es grüßt herzlich Sylvia
Benutzeravatar
Sylvia
 
Beiträge: 429
Registriert: 08.02.2006 21:15
Notebook:
  • Amilo A1650G


Zurück zu Mainboard / BIOS / Akku